Posted in:

7 Must Safety Wears for Construction Workers

© by Image courtesy of www.safetyandhealthmagazine.com

“The road to success is always under construction.”   ~Lily Tomlin

What we hear is- “Rome was not built in a day”, whilst what we don’t know is – “Rome was not built in a day; it took time, blood, sweat and tears.”

Humans are said to be the most intelligent, evolved, and creative creatures to reside on this planet. We have very wide imaginations and possess the ability to wander off to magical realms and dream dreams. However, an even better prowess that we possess is the capability to make these dreams come true. 

Wandering off into distant dreamlands isn’t a tough task. However, the part that poses a challenge is turning them into our reality. The planning, plotting, prowess, power, and precision that it takes to build something from the ground up is truly commendable.

In construction sites due to the falling debris and other situation-posed accidents. In a situation like this, it’s best to rent a dumpster in Butler County to make room for all the debris generated during construction rather than leaving them on the ground.–

The construction workers who put in their hard work, blood, sweat, and tears, are solely responsible for the framing of our fantasies. They are the ones who take up risk and impart structure and life to our unshaped thoughts. Their safety from hazards at construction sites is an intense issue and must be given its fair share of attention. 

So, taking up the matter of safeguarding these workers against grave perils, we have curated a list of 7 must-have safety wears for construction workers. They are:

  1. Protective Head Gears

There is a high chance of head injuries in construction sites due to the falling debris and other situation-posed accidents.

When present on the site, safety helmets, hard hats, or headgears must be worn at all times. They should be inspected regularly for cracks and ruptures, and the shock-absorbing lining should also be held in place.

  1. Safety Glasses or Goggles

When cutting, grinding, chopping, or wielding, one’s eyes are exposed to harm. Hence safety glasses and eye-protective gear must be used. They should surpass the standard medical grade or be made of material akin to it.

They are required to provide unrestricted vision and movement and should be cleanable. Similarly, in cases where the workers are handling chemicals, chemical splash safety goggles must be adorned. 

  1. Respiratory Protection

Inhale Good, Exhale Bad!

In locations that have a high concentration of harmful and polluted airborne particles, respiratory protection kits are to be utilized. Inhaling harmful substances can make one vulnerable to a number of undesired health issues, so, make sure caution kits are available when needed.

  1. Face Shields and Hearing Protection

Shielding all five basic human sense organs, i.e., eyes, ears, nose, tongue, and skin, is quite essential while working in an in-progress zone. 

Having covered our eyes and nose, we now move on to the other organs. Face shields are to be used in cases of welding, cutting, and grinding to arm our face against the dangers of sparks, debris, etc. 

Similarly, presuming that the noise levels in the workspace are more than what can be handled, ear protective gear in the form of noise-canceling headphones, earplugs, and earmuffs must be used. Simply putting in cotton to blur out noises is prohibited.

  1. High Visibility & Reflective Vests

On-site workers should wear highly visible vests if exposed to vehicular traffic. Site engineers doing rounds for site inspections are also advised to wear reflective and visible clothing.

Also, protective clothing with full-length sleeves and long work pants or trousers should be used to extend an extra layer of protection for these workers.

  1. Defensive Gloves and Toughened Shoes

Having covered the sense organs, we now come forth to the precautionary shielding of our limbs. To hurdle around the danger, shoes or boots with steel toe cap coverings are considered vital. Nonetheless, one made of a similar material also passes along just fine, as long as they follow the set norms. 

Likewise, a workforce handling sharp, rough or hot equipment is to be equipped with gloves of material suitable to the occasion. Check out https://www.saint.cc/ for appropriate site apparel.

  1. Safety Belts & Harness

In the occasion of mid-air suspension, safety belts and harnesses are key. If the levels are elevated above 6 feet or more, suspension equipment becomes quintessential.

Railings, nets and other equipment can also be put to use. These are acquired to break the body’s free fall and limit the forces exerted on the wearer. 

To summarize…

There are about 150,000 construction accidents that occur each year. So, if you don’t wish to contribute to this number, put on your safety wear, so that building something doesn’t turn you into a tragedy in the air!