To sign up for our daily email newsletter, CLICK HERE
There are many things to consider when replacing a motherboard on a system. It is more complicated than just installing a new motherboard in your system. You need to make sure that it is compatible with your processor and memory power supply units.
Sometimes, a new motherboard can cause windows to not load properly due to the configuration of the system’s hard drive. Sometimes your system settings need to be adjusted and the operating system might have to be reinstalled.
How To Know Your Motherboard need to be replaced
There are usually no warning signs that your motherboard may be about to fail. It can work fine one day and then suddenly stop working the next. It is possible to be alerted if your USBs stop working efficiently, or if your keyboard or mouse aren’t being recognized.
However, the most common issue with a motherboard is the on-board video input. You may turn on your computer and be met by a blank screen.
Find a Replacement Motherboard
The X570 chipset AM4 is the most powerful with PCIe4.0 support for the latest GPUs, extreme overclocking options and faster storage solutions. The most popular motherboard chipset is the X570. This is due to its high-end performance, advanced functionality and the latest features. But the question is which one is the best X570 motherboard?
It is natural to want to maximize the performance of each component when building or purchasing a system. It would be a shame to spend money on a CPU but not be able to use it in the way you intended. The Asus ROG X570 crosshair VIII Hero motherboard is the best X570 motherboard in mid-range motherboards which will allow you to get the most out of your system and CPU.
Backup your data
Make sure that you have at least one backup of all your data before you begin to disassemble things. You needn’t worry about backing up Windows and applications–although you should, if possible, back up the configuration information for your mail client, browser, and so on–because unless you’re replacing an old motherboard with an identical new motherboard, you may need to reinstall Windows and all applications from scratch.
The specifics of your motherboard, case and peripheral components, as well as the steps involved in replacing it, will determine the required steps. The process is simple but not difficult, although it can be time-consuming.
- Make sure you turn off any power source that could cause your computer or peripheral devices to become connected.
- The motherboard may be blocked by system fans, water pumps or reservoir tanks. To clear the interior of your computer’s case, first remove them.
- Disconnect power connectors, data cables and hard drives from optical drives.
- To unlock the graphics cards, press the latch at the connector’s side. Next, slide it out of its slot in your computer. Also remove any expansion cards that are attached to the slots.
- You can use this technique to place the computer on its side, push down the latch and then lift the graphics card.
- Two Phillips #2 Head 5mm Screws holding the hard drive in position should be removed.
- Two Phillips #2 head 5mm screws holding at the other side of the hard drive also need to be removed .
- Slide the hard drive from its metal casing.
- Take the cables out of the hard drive’s back.
- Start to unplug all cables from your motherboard. You will find clips on many cables that you need to undo before you can take them off the motherboard.
- Nine Phillips #2 Head 5mm Screws (5mm) are to be removed from the motherboard. Make sure your computer is on its side when you remove the screws. This will ensure that nothing falls or gets damaged.
- Make sure you have removed all wires and screws. Then, carefully take the motherboard out of the computer case.
- Now make sure that you have the right CPU for your motherboard.
- Check out Asus ROG X570 crosshair VIII Hero, one of the best X570 motherboard.
- Place the CPU on its base by aligning its notches and using the positioning markers on the motherboard.
- Secure the socket cover to the CPU and then install the CPU heatsink or cooling fan.
- Connect the power connector for the cooling fan to the correct header on the motherboard.
- Next, find the mounting points on the bottom of the PC case and install the PSU.
- Once you’re done, connect all the cables and other components as they were.
After you are certain everything is in order, it’s time to do the smoke test. For now, take off the cover. The power cable should be connected to the wall socket and then to your system unit. If you have a rocker switch at the back of your power supply that controls power, flip that switch to the “1”, or “on” position. The system should begin to turn on when you press the main power button at the front of your case. Make sure the case fan, power supply fan and CPU fan are all spinning. The hard drive should spin up, and you will hear a happy beep to confirm that the system is operating normally. Everything should then be functioning properly.
Turn off the system and disconnect the power cord. Reinstall the access panels and then move the system to its original place. Turn on the system by connecting the keyboard, mouse, display, and other peripherals.